For detailed information about this, please see here. “Hands Free Mode” and “User Assisted Mode” Camerasĭepending on whether your camera supports Hands Free Mode or User Assisted Mode (see here for the camera support list), you may be prompted periodically to change the Focus Adjustment setting on your camera.
To start the calibration, simply hit the Start button either in the Status tab or on the control bar at the bottom of the screen.Īs the calibration progresses, you will see information updated on the screen similar to this:
This shows the current state of the test and the settings that will be used when run. The Status tab is the page that is shown when you open the test (see the image above). See Settings – Calibration for further information. The default values are usually most appropriate, but if you are an expert user you may wish to adjust the settings. The settings that will be used for this test are shown in the Settings panel. Be sure to be familiar with the setup and have run Target Setup before running the calibration otherwise your results may not be accurate. The Target Setup utility is an automated utility to help you do this, along with all the information you need here. With a camera connected, from the Camera page, choose Calibration, or use the menu to select Camera > Calibration.īefore running a calibration, you need to make sure your camera and target is set up correctly. Reikan FoCal’s automatic Autofocus Calibration can determine the calibration values required for your camera and lens at the touch of a button! Opening Focus Calibration
0 kommentar(er)
